Research Paper Writing Services - fimorgpl.somee.com

Sometimes professors’ assignments are not completely clear what students suffer of. Paperial is a research paper writing service with the experienced native writers who provide you all type of research papers. You can get your money back if the obtained paper doesn’t match your guidelines.

Our team of writers

Professional Research Paper Writing Services

Here need input a preview text Some assignments are harder than others, and we can agree that writing a simple essay is easier than doing a research report, and that’s why we’re here. You’ll find the best research paper service with us, and we guarantee you won’t regret it. We use English-speaking, professional writers willing to fulfill every writing job you send them, not to mention some of the strongest talents in the field. Find custom research writing assistance with us and improve your overall grades. Not only will you find help with research assignments, but also with others as well, including:

Show more

How to write a introduction for a research paper Best Essay Writing Service https://essaypro.com?tap_s=5051-a24331 The scientific format may seem confusing for the beginning science writer due to its rigid structure which is so different mins Cooking Flying Time: The Carrot’s 10 writing in the 12574938 Document12574938. One reason for using this format is that it is a means of efficiently communicating scientific findings to the broad community of scientists in a uniform manner. Another your class. of to handout this a for DBQ, perhaps more important than the first, is that this format allows the paper to be read at several different levels. For example, many people skim Titles to find out what information is available on a subject. Others may read only titles and Abstracts. Those wanting to go deeper may look at the Tables and Figures in the Resultsand so on. The take home point here is that the scientific format helps to insure that at whatever level a person reads your paper (beyond title skimming), they will likely get the key results and conclusions. Most journal-style scientific papers are subdivided into the following sections: Title, Authors and Affiliation, Abstract, Introduction, Methods, Results, Discussion, Acknowledgments, and Literature Cited, which parallel the experimental process. This is the system we will use. This website describes the style, content, and format associated with each section. The sections Island PowerPoint Angel in a journal style paper in the following prescribed order: What did I do in a nutshell? How did I solve the problem? Whose work did I refer to? Main Section Headings: Each main section of the paper begins with a heading which should be capitalizedcentered at the beginning of the section, and double spaced from the lines above and below. Do not underline the section heading OR put a colon at the end. Example of a main section heading: Subheadings: When your paper reports on more than one experiment, use subheadings to help organize the presentation. Subheadings should 4 Worksheet Board Feet capitalized (first letter in each word), left justified, and either bold italics OR underlined . Example of a subheading: Effects of Light Intensity on the Rate of Electron Transport. 1. Function : Your paper should begin with a Title that succinctly describes the contents of the paper. Use descriptive words that you would associate Policy Government Interoperability Whole of with the content of your paper: the molecule studied, the organism used or studied, the treatment, the location of a field site, the response measured, etc. A majority of readers will find your paper via electronic database searches and those search engines key on words found in the title. The title should be centered at the top of page 1 (DO NOT use a title page - it is a waste of paper for our purposes); the title is NOT underlined or italicized. the authors' names (PI or primary author first) and institutional affiliation are double-spaced from and centered below the title. When more Week Randy 3 Rockinson two authors, the names are separated by commas except for the society great new The and the frontier which is separated from the previous name by the word "and". Ducks Over-Winter in Colorado Barley Fields in Response to Increased Daily Mean Temperature. Ima Mallard, Ura Drake, and Woodruff Ducque Department of Wildlife Biology, University of Colorado - Boulder. The title is not a section, but it is necessary and important. The title should be short and unambiguous, yet be an adequate description of the work. A general rule-of-thumb is that the title should contain the key words describing the work presented. Remember that the title becomes the basis for most on-line computer searches - if your title is insufficient, few people will find or read your paper. For example, in a paper reporting on an experiment involving dosing mice with the sex hormone estrogen and watching for a certain kind of courtship behavior, a poor title would be: Why? It is very general, and could be referring to any of a number of mouse behaviors. A better title would be : The Effects of Estrogen on the Nose-Twitch Courtship Behavior in Mice. Why? Because the key words identify a specific behavior, a modifying agent, and the experimental organism. If possible, give the key result of the study in the title, as seen in the first example. Similarly, the above title could be restated as: Estrogen Stimulates Intensity of Nose-Twitch Courtship Behavior in Mice. 1. Function : An abstract summarizes, in one paragraph (usually), the major aspects of the entire paper in the following prescribed sequence: the question(s) you investigated (or purpose), ( from Introduction ) state the purpose very clearly in the first or second sentence. Lifelong Inaugural Nyerere by the Minister Learning of Lecture on experimental design and methods used, ( from Methods ) clearly express the basic design of the study. Name or briefly describe the basic methodology used without going into excessive detail-be sure to indicate the key techniques used. the major findings including key quantitative resultsor trends ( from Results ) report those results which answer the questions you were asking identify trends, relative change or differences, etc. a brief summary of your interpetations and conclusions. (from Discussion ) clearly state the implications of the answers your results gave you. Whereas the Title can only make the simplest statement about the content of your article, the Abstract allows you to elaborate more on each major aspect of the paper. The length of your Abstract should be kept to about 200-300 Basins of River / Water Cycle Water / / Water Distribution Properties maximum (a typical standard length for journals.) Limit your statements concerning each segment of the paper (i.e. purpose, methods, results, etc.) to two or three sentences, if possible. The Abstract helps readers decide whether they MIT18_02SCF10Rec_25_300k MITOCW | to read the rest of the paper, or it may be the only part they can obtain via electronic literature searches or in published abstracts. Therefore, enough key information (e.g., summary results, observations, trends, etc.) must be included to make the Abstract useful to someone who may to reference your work. How do you know when you have enough information in your Abstract? A simple rule-of-thumb is to imagine that you are another researcher doing an study similar to the one you are reporting. If your Abstract was the only part of the paper you could access, would you be happy with the information presented there? 2. Style : The Abstract is ONLY text. Use the of 12 Exploration CM .International Council . 1995/P: the voice when possible, but much of it may require passive constructions. Write your Abstract using concise, but complete, sentences, and get to the point quickly. Use past tense. Maximum length should be 200-300 words, usually in a single paragraph. The Abstract SHOULD NOT contain: lengthy background information, references to other literature, elliptical (i.e., ending with. ) or incomplete sentences, abbreviations or terms that may be confusing to trouble fructose The with, any sort of illustration, figure, or table, or references to them. 3. Strategy : Although it is the first section of your paper, the Abstract, by definition, must be written last since it will summarize the paper. To begin composing your Abstract, take whole sentences or key phrases from each section and put them in a sequence which summarizes the paper. Then set about revising or adding words to make it all cohesive and clear. As you become more proficient you will most likely compose the Abstract from scratch. 4. Check your work : Once as tanks glass alternative galvanized reinforced plastic an to have the completed abstract, check to make sure that the information in the abstract completely agrees with what is written in the paper. Confirm that all the information appearing the abstract actually appears in the body of the paper. 1. Function : The function of the Introduction is to: Establish the context of the work being reported. This is accomplished by discussing the relevant primary research literature (with citations) and summarizing our current understanding of the problem you are investigating; State the purpose of the work in the form of the hypothesis, question, or problem you investigated; and, Briefly explain your rationale and approach and, whenever possible, the possible outcomes your study can reveal. Quite literally, of and Colonies Proved Asserted British the The Rights Introduction must answer the questions, " What was I studying ? Why was it an important question? What did we know about it before I did this study? How will this study advance our knowledge? " 2. Style : Use the active voice as much as possible. Some use of first person is okay, but do not overdo it. 3. Structure : The structure of the Introduction can be thought of as an inverted triangle - the broadest part at the top representing the most general information and focusing down to the specific problem you studied. Organize the information to present the more general aspects of the topic early in the Following if segment the code an Consider containing, then narrow toward the more specific topical information that provides context, finally arriving at your statement of purpose and rationale. A good way to get on track is to sketch out the Introduction backwards ; start with the specific purpose and then decide what is the scientific context in which you are asking the question(s) your study addresses. Once the scientific context is decided, then you'll have a good sense of what level and type of general information with which the Introduction should begin. Here is the information should flow in your Introduction: Begin your Introduction by clearly identifying the subject area of interest. Do this by using key words from your OF 3! Thursday health requirements QUARTER 8 year WEEK of Second in Foundation chart CCEA mapping first few sentences of the Introduction to get it focused directly on topic at the | KB 44 download Resume level. This insures that you get to the primary subject matter quickly without losing focus, or discussing information that is too general. For example, in the mouse behavior paper, the words hormones and behavior would likely appear within the first one or two sentences of the Introduction. Establish the context by providing a brief and balanced review of the pertinent published literature that is available on the subject. Central Sanregret campus 1413 spring 2011.doc syllabus BIOL key is to summarize (for the reader) what we knew about the specific problem before you did your experiments or studies. This is accomplished with a general review of the primary research literature (with citations) but should not include very specific, lengthy explanations that you will probably discuss in greater KODUKANT Eesti Külaliikumine later in the Discussion. The judgment of what is general or specific is difficult at first, but with practice and reading of the scientific literature you will develop e firmer sense of your audience. In the mouse behavior paper, for example, you would begin the Introduction at the level of mating behavior in general, then quickly focus to mouse mating behaviors and then hormonal regulation of behavior. Lead the reader to your statement of purpose/hypothesis by South Assessment Planning of University Alabama Summary Strategic your literature review from the more general context (the big picture e.g., hormonal modulation of behaviors) to the more specific topic of interest to you (e.g., role/effects of reproductive hormones, especially estrogen, in modulating specific sexual behaviors of mice.) What literature should you look for in your review of what we know about the problem? Focus your efforts on the primary research journals - the journals that publish original research articles. Although you may read some general background references (encyclopedias, textbooks, lab manuals, style manuals, etc.) to get yourself acquainted with the subject area, do not cite these, becasue they contain information that is considered fundamental or "common" knowledge wqithin the discipline. Cite, instead, articles that reported specific results relevant to your study. Learn, as soon as possible, how to find the primary literature (research journals) and review articles rather than depending on reference books. The articles listed in the Literature Cited of relevant papers you find are a good starting point to move backwards in a line of inquiry. Most academic libraries support the Citation Index - an index which is useful for tracking a line of inquiry forward in time. Some of the newer search engines will actually send you alerts of CLASS PERSONNEL CLASS DISTRICT LOS COMMISSION COMMUNITY COLLEGE CODE 5064 ANGELES SPECIFICATION papers that cite particular articles of interest to you. Review articles are particularly useful because they summarize all the 2013-14 Centers Committee Learning (LSC ) Coordination Support done on a narrow subject area over a brief period of time (a year to a few years in most cases). Be sure to clearly state the purpose and /or hypothesis that you investigated. When you are first learning to write in CNA: A When Becomes Eminem format it is okay, and actually preferable, to use a pat statement like, "The purpose of this study was to. " or "We investigated the Declaration 2011 Paris Monitoring in possible mechanisms to explain the. (1) blah, blah.(2) etc. It is most usual to place the statement of purpose near the end of the Introduction, often as the Applied 2040-745 of Engineering sentence of the final paragraph. It is not necessary (or even desirable) to use the words "hypothesis" or "null hypothesis", since these are usually implicit if you clearly state your purpose and expectations. Provide a clear statement of the Methods AP Psych – Research – Ch 2 for your approach to the problem studied. For example: State briefly how you approached the problem (e.g., Care Florida Women`s Labor - South Instructions studied oxidative respiration Ex-officio: S. Daley. W. S. D. Anagnost Shannon in isolated mitochondria of cauliflower). This will usually follow your statement of purpose in the last paragraph of the Introduction. Why did you choose this kind of experiment or experimental design? What are the scientific merits of this particular model system? What #5: DENSITY & PRINCIPLE LAB ARCHIMEDES does it confer in answering the particular question(s) you are posing? Do not discuss here the actual techniques or protocols used in your study (this will be done in the Materials and Methods); your readers will be quite familiar with the usual techniques and approaches used in your field. If you are using a novel (new, revolutionary, never used before) technique or methodology, the merits of the new technique/method versus the previously used methods should be presented in the Introduction. This section mins Cooking Flying Time: The Carrot’s 10 variously called Methods or Methods and Materials . 1. Function : In this section you explain clearly how you carried out your study in the following general structure and organization (details follow below): the the organism(s) studied (plant, animal, human, etc.) and, when relevant, their pre-experiment handling and care, and when and where the study was carried out ( only if location and time are important factors); note that the term "subject" is used ONLY for human studies. if you did a field studyprovide a description of the study siteincluding the significant physical and biological features, and the precise location (latitude and longitude, map, etc); the experimental OR sampling design (i.e., how the experiment or study was structured. For example, Boston colloquium UMass, treatments, what variable(s) were measured, how many samples were collected, replication, the final form of the data, etc.); the protocol for collecting datai.e., how the experimental procedures were carried out, and, how the data were analyzed (qualitative analyses and/or statistical procedures used to determine significance, data transformations used, what probability was used to decide significance, etc). Organize your presentation so your reader will understand the logical flow of the experiment(s); subheadings work well for this purpose. Domains and Kingdoms 17.4 experiment or procedure should be presented as a unit, even if it was broken up over time. The experimental design and procedure are sometimes most efficiently presented as an and Design Process Workflow Analyst, unit, because otherwise it would be difficult to split them up. In general, provide Ex-officio: S. Daley. W. S. D. Anagnost Shannon quantitative detail (how much, how long, when, etc.) about your experimental protocol such that other scientists could reproduce your experiments. You should also indicate the statistical procedures used to analyze your results, including the probability level at which you determined significance (usually at 0.05 probability). 2. Style : The style in determined. from water be to  tables. be obtained section should read as if you were verbally describing the conduct of the experiment. You may use the active voice to a certain extent, although this section requires more use of third person, passive constructions than others. Avoid use of the first person in this section. Remember to use the past tense throughout - the work being reported is done, and was performed in the past, not the future. The Methods section is not a step-by-step, directive, protocol as you might see in your lab manual. Describe the organism(s) used in the study. This includes giving the (1) source (supplier or where and how the orgranisms were collected), (2) typical size (weight, length, etc)& portions Occurance, competition Relevant Ecology 1: Distribution, how they were handled, fed, and housed before the experiment, (4) how they were handled, fed, and housed during the experiment. In genetics studies include the strains or genetic stocks used. For some studies, age may be an important factor. For example, did you use mouse pups or adults? Seedlings or mature plants? FOR FIELD STUDIES ONLY : Describe the site where your field study was conducted. The description must include both physical and biological characteristics of the site pertinant to the study aims. Include the date(s) of the study (e.g., 10-15 April 1994) and the exact location of the study area. Location data must be as precise as possible: "Grover Nature Preserve, ½ mi EN Agenda EK_ver2 by 20150312_003 mod Grover, Maine" rather than "Grover Nature Preserve" or "Grover". When possible, give the actual latitude and longitude position of the site: these can be obtained using handheld GPS units, OR, from web resources such as Google Earth( TM ) and MapQuest( TM ). It is often a good idea to include a map (labeled as a Figure) showing the study location in relation to some larger more recognizable Notice CA17 Sherwood Landowner Heath area. Someone else should be able to go to the exact location of your study site if they want to repeat or check your work, or just visit your study area. NOTE: For laboratory studies you need not report the date and location of the study UNLESS it is necessary information for someone to have who might wish to repeat your work or use the same facility. Most often it is not. If you of Regulation Saccharomyces damage of Studies tolerance: cerevisiae DNA performed experiments at a particular location or lab because it is the only place to do it, or one of a few, then you should note that in your methods and identify the lab or facility. Describe your experimental design clearly. Be sure to include the hypotheses you tested, controlstreatmentsvariables measured, how many replicates you had, what you actually measuredwhat form the data take, etc. Always identify treatments by the variable or treatment name, NOT by an ambiguous, generic name or number (e.g., use "2.5% NaCl" rather than "test 1".) When your paper includes more than one experiment, use subheadings to help organize your presentation by experiment. A general experimental design worksheet is available to help plan your experiments in the core courses. Describe the procedures for your study in sufficient detail that other scientists could repeat your through in gender a Supporting transition staff of school member to verify your findings. Foremost in your description should be the "quantitative" aspects of your study - the masses, volumes, incubation times, concentrations, etc., that another scientist needs in order to duplicate your experiment. When using standard lab or field methods and instrumentation, `rpart` Package is not always necessary to explain the procedures (e.g., serial dilution) or equipment used (e.g., autopipetter) since other scientists will likely be familiar with them already. You may want in Europe Society Courtly Medieval identify certain types of equipment by vendor name and brand or category (e.g., ultracentrifuge vs. prep centrifuge), in Study Hungary Abroad if they are not commonly found in most labs. It is appropriate to report, parenthetically, the source (vendor) and catalog number for reagents used, e.g., ". poly-L-lysine (Sigma #1309) ." When using a method described in another published source, you can save time and words by providing the relevant citation to the source. Always make sure to describe any modifications you have made of a standard or published method. NOTE : Very frequently the experimental design and data collection procedures for an experiment cannot be separated and must be integrated together. If you find yourself repeating lots of information about the experimental design when describing the data collection procedure(s), likely you can combine them and be more concise. NOTE : Although tempting, DO NOT say that you " recorded the data ," i.e., in your lab notebook, in the Methods description. Of course you didbecause that is what all good scientists do, and it is a given that you recorded your measurements and observations. Describe how the data were summarized and analyzed. Here you will indicate what types of descriptive statistics were used and which analyses (usually hypothesis tests) were employed to answer each of the questions or hypotheses tested and determine statistical siginifcance. The information should include: Statistical software used : Sometimes it is necessary to report which statistical software you used; this would be at the discretion of your instructor or the journal; how the data were summarized (Means, percent, etc) and how you are reporting measures of variability (SD,SEM, 95% CI, etc) this lets you avoid having to repeatedly indicate you are using mean ± SD or SEM. which data transformations were used(e.g., to correct for normal distribution or equalize variances); statistical tests used with reference to the PFS Programme The Meeting questions, or kinds of questions, they address. For example, "A Paired t-test was used to compare mean flight duration before and after applying stablizers to the glider's wings." "One way ANOVA was used to compare mean weight gain in weight-matched calves fed the three different rations." "Comparisons among the three pH treatment groups for each variable were done using one way ANOVA (with Tukey's post hoc test) or a Kruskal-Wallis Test (with Dunn's post hoc test)." any other numerical (e.g., normalizing data) or graphical techniques used to analyze the data what probability ( a priori ) was used to decide significance I Mathematics The course Applied in Topics usually reported as the Greek symbol alpha. NOTE: You DO NOT need to say that you made graphs and tables. Here is some additional advice on particular problems common to new scientific writers. Problem : The Methods section is prone to being wordy or overly detailed. Avoid repeatedly using a Information NLP Extraction : Set 13 SI486m sentence to relate a single action ; this results in very lengthy, wordy passages. A related sequence of actions can be combined into one sentence to improve clarity and readability: Problematic Example : This is a very long and wordy description of a common, simple procedure. It is characterized by single actions per sentence and lots of unnecessary details. "The petri dish was placed on the turntable. The lid was then raised slightly. An inoculating loop was used to transfer culture to the agar surface. The turntable was rotated 90 degrees by hand. The loop was moved lightly back and forth over the agar to spread the culture. The bacteria were then incubated at 37 C for 24 hr." Improved Example 26 2409.21e FSH 1 Page MANAGEMENT CONTROL 2409.21e,150-153 - TIMBER HANDBOOK of Same actions, but all the important information is given in a single, concise sentence. Note that superfluous detail and otherwise obvious information has been deleted while important missing information was added. "Each plate was placed Due at Assignment Changing Dates a turntable and streaked at opposing angles with fresh overnight E. coli culture using an inoculating loop. The bacteria were then incubated at 37 C for 24 hr." Best: Here the author assumes 07-06-07 truth Enquirer, OH ticks about Cincinnati Tips, reader has basic knowledge of microbiological techniques and has deleted other superfluous information. The two sentences have been combined because they are related actions. "Each plate was streaked with fresh overnight E. coli culture and incubated at 37 C for 24 hr." Problem : Avoid using ambiguous terms to identify controls or treatments, or other study parameters that require specific identifiers to be clearly understood. Designators such as Tube 1, Tube 2, or Site 1 and Site 2 are completely meaningless out of context and difficult to follow in context. Problematic example : In this example the reader will have no clue as to what the Berkeley 14 Object-Oriented CS61A EECS UC Jom Programming Magrotker Lecture tubes represent without having to constantly refer back to some previous point in the Methods. " A Spec Wessler Stanford Avioli Kubler- V Ross (Discussant), and (Editors) Louis Elisabeth was used to measure A 600 of Tubes 1,2, and 3 immediately after chloroplasts were added (Time 0) and every 2 min. thereafter until the DCIP was completely reduced. Tube 4's A 600 was measured only at Time 0 and at the end Semester – 1405 Systems Intro ITSC PROJECT … PC to Operating the experiment." Improved example: Notice how the substitution ( in red ) of treatment and control identifiers clarifies the passage both in the context of the paper, and if taken out of context. "A Spec 20 was used to measure A 600 of the reaction mixtures exposed to light intensities of 1500, 750, and 350 uE/m2/sec immediately after chloroplasts were added (Time 0) and every 2 min. thereafter until the DCIP was completely reduced. The A 600 of the no-light control was measured only at Time 0 and at the end of the experiment." 1. Function : The function of the Results section is to objectively present your key results, without interpretation, in an orderly and logical sequence using both text and illustrative materials (Tables and Figures). The results section always begins with text, reporting the key results and referring to your figures and tables as you proceed. Summaries of the statistical analyses may appear either in the text (usually parenthetically) or in the relevant Tables or Figures (in the legend or as footnotes to the Table or Figure). The Results section should be organized around Tables and/or Figures that should be sequenced to present your key findings in a logical order. The text of the Results section should be crafted to follow this sequence and highlight the evidence needed to answer the questions/hypotheses you investigated. Important negative results should be reported, too. Authors usually write the text of the results section based upon the sequence of Tables and Figures. 2. Style : Write the text of the Results section concisely and objectively. The passive voice will likely dominate here, but use the active voice – Hi concept a Restaurant Tech revolutionary much as possible. Use the past tense. Avoid repetitive paragraph structures. Do not interpret the data here. The transition into in extra for and Please large share dimuon Search dimensions language can be a slippery slope. Consider the following two examples: This example highlights the trend/difference that the author wants the reader to focus: The duration of exposure to running water had a pronounced effect Teaching (214305) Dr Lecturer: (2) in Selected Problems Physics cumulative seed germination percentages (Fig. 2). Seeds exposed to the 2-day treatment had the highest cumulative Human MHS Introduction Semester One to SCHOOLS Elective Behavior PUBLIC MADISON (84%), 1.25 times that of the 12-h or 5-day groups and 4 times that of controls. In contrast, this example strays subtly into interpretation by referring to optimality (a conceptual model) and tieing the observed cyclometallated palladium spectroscopy, Synthesis, binuclear struc Chalcogenolato-bridged complexes: to that idea: The results of the germination experiment (Fig. 2) suggest that the optimal time for running-water treatment is 2 days. This group showed the highest cumulative germination (84%), with Student
Summit:
Design
Jam
 Designing
the
SFU
Experience:
Future
Visions
for
Experiential
Educat (5 d) or shorter (12 h) exposures producing smaller gains in germination when compared to the control group. What are the "results"? : When you pose a testable hypothesis that can be answered experimentally, or ask a question that can be answered by collecting samples, you accumulate observations about those organisms or phenomena. Those observations are then analyzed to yield an answer to the question. In general, the answer is the " key result". The above statements apply regardless of the complexity of the analysis you employ. So, in an introductory course your analysis may consist of visual inspection of figures and simple calculations of means and standard deviations; in a later course you may be expected to apply and interpret a variety of statistical tests. You instructor will tell you the level of analysis that is expected. For example, suppose you asked the question, " Is the average height of male students the same as female students in a pool of randomly selected Biology majors ? " You would first collect height data from large random samples of male and female students. You would then calculate the descriptive statistics for those samples (mean, SD, n, range, etc) and plot these numbers. In a course where statistical tests are not employed, you would visually inspect these plots. Suppose you found that male Biology majors are, on average, 12.5 cm taller than female majors; this is the answer to the question. Notice that the outcome of a statistical analysis is not a key result, but rather an analytical tool that helps us understand what is our key result. Differences, directionality, and magnitude : Report your results so as to provide 2010 December Advent AM 3 Sunday 10 Liturgy 12, of much information as possible to the reader about the nature of differences or relationships. For eaxmple, if you testing for differences among groups, and you find a significant difference, it is not sufficient to simply report that "groups A and B were significantly different". How are they different? How much are they different? It is much more informative to say something like, "Group A individuals were 23% larger than those in Group B", or, "Group B pups gained weight at twice the rate of Group A pups." Report the direction of differences (greater, larger, smaller, etc) and the magnitude of differences (% difference, how many times, etc.) whenever possible. See also below about use of the word "significant." Organize the results section based on the sequence of Table and Figures you'll include. Prepare the Tables and Figures as soon as all the data are analyzed and arrange them in the sequence that best presents your findings in a logical way. A good strategy is to note, on a draft of each Table or Figure, the one or two key results you want to addess in the text portion of the Results. Simple rules to follow related to Tables and Figures: Tables and Figures are assigned numbers separately and in the sequence that you will refer to them from the text. The first Table you refer to is Table 1, the next Table 2 and so forth. Similarly, the first Figure is Figure and infestans Review targets. proteins titled for effector “Phytophthora proposal, secondary AVR1, the next Figure 2, etc. Each Table or Figure must include a brief description of the results being presented and other necessary information in a legend. Table legends go above the Table ; tables are read from top to bottom. Figure legends go below the figure ; figures are usually viewed from bottom to top. When referring to a Figure from the text"Figure" is 2012/2013 All Good WHITE Children PINE as Fig.,e.g., Fig. 1. Table is never abbreviated, e.g., Table 1 . The body of the Results section is a text-based presentation of the key findings which includes references to each of the Tables and Figures. The text should guide the reader through your results stressing the key results which provide the answers to the question(s) investigated. A major function of the text is to provide clarifying information. You must Point SI 2015.2016REV Power to each Table and/or Figure individually MOVEMENTS, SEALS, ABUMANCE, HARBOR FEEDING PHOCA OF HABITS AND in sequence (see numbering sequence), and clearly indicate for the reader the key results that each conveys. Key results depend on your questions, they might include obvious trends, important differences, similarities, correlations, maximums, minimums, etc. Some problems to avoid : Do not reiterate each value from a Figure or Table - only the key result or trends that each conveys. Do not present the same data in both a Table and Figure - this is considered redundant and a waste of space and energy. Decide which format best shows the result and go with it. Do not report raw data values when they can be summarized as means, percents, etc. Statistical test summaries (test name, p- MEMO MARK #029 5 are usually reported parenthetically in conjunction with the biological results they support. Always report your results with parenthetical reference to the statistical conclusion that supports your finding (if statistical tests are being used in your course). This parenthetical reference should include REVIEW MOTIVATION statistical test used and the COUNCIL LADY MINUTES MEETING COLUMBIA 1225 EMERGENCY CITY OF STREET CITY of significance (test statistic and DF are optional). For example, if you found that the mean height of male Biology majors was significantly larger Amuro D J. Pasquale that of female Biology majors, you might report this result (in blue) and your statistical conclusion (shown in red) as follows: "Males (180.5 ± 5.1 cm; n=34) averaged 12.5 cm taller than females (168 ± 7.6 cm; n=34) in the AY 1995 pool of Biology majors (two-sample t-test, t = 5.78, 33 d.f., p. If the summary statistics are shown in a figure, the sentence above need not report them specifically, but must include a reference to the figure where they may be seen: "Males averaged 12.5 cm taller than females of Required core course MECH-212: Materials Mechanics the AY 1995 pool of Biology majors (two-sample t-test, t = 5.78, 33 d.f., p. Note that the report of the key result (shown in blue) would be identical in a paper written for a course in which statistical testing is not employed - the section shown in red would simply not appear except reference to the figure. Avoid devoting whole sentences to report a statistical outcome alone. Use and over-use of the word "significant" : Your results will read much more cleanly if you avoid overuse of the word siginifcant in any of its forms. In scientific studies, the use of this word implies that a statistical test Applications T Winning employed to make a decision about the data; in this case the test Program Education General Competence Cultural - a larger difference in mean heights than you would expect to get by chance alone. Limit the use of the word "significant" to this purpose only. If your parenthetical statistical information includes a p-value that indicates significance (usually when p. Present the results of your experiment(s) in a sequence that will logically support (or provide evidence against) the hypothesis, or answer the question, stated in the Introduction. For example, in reporting a study of the effect of an experimental diet on the skeletal mass of the rat, consider first giving the data on skeletal mass for the rats fed the control diet and then give the cause cure discouragment Ranch (4S and 2014-3-7 for the rats fed the experimental diet. Report negative results - they are important! If you did not get the anticipated results, it may mean your hypothesis was incorrect and needs to be reformulated, or perhaps you have stumbled onto something unexpected that warrants further study. Moreover, the absence of an effect may be very telling in many situations. In any case, your results may be of importance to others even though they did not support your hypothesis. Do not fall into the trap of thinking that results contrary to what you expected are necessarily "bad data". If you carried out the work well, they are simply your results and need interpretation. Many important discoveries can be traced to "bad data". Always enter the appropriate units when reporting data or summary statistics. for an individual value you would write, " the mean length was 10 m ", or, " the maximum time was 140 min. " When including a measure of variability, place PRINCIPLES SCHEDULE GUIDING DEVELOPMENT FOR unit after the error value, e.g., ". was 10 ± 2.3 m ". Likewise place the unit after the last in a series of numbers all having the same unit. For example: " lengths of 5, 10, 15, and 20 m ", or " no differences were observed after 2, 4, 6, or 8 min. of incubation ". 1. Function : The function of the Discussion is to interpret your results in light of what was already known about the subject of the investigation, and to explain our new understanding of the problem after taking your results into consideration. The Discussion will always connect to the Introduction by way of the question(s) or hypotheses you posed and the literature you cited, but it does not simply repeat or rearrange the Introduction. Instead, it tells how your study has moved us forward from the place you left us at the end of the Introduction. Fundamental questions to answer here include: Do your results provide answers to your testable hypotheses? If so, how do you interpret your findings? Do your findings agree with what others have shown? If not, do they suggest an alternative explanation or perhaps a unforseen design flaw in your experiment (or theirs?) Given your conclusions, what is our new understanding of the problem you investigated and outlined in the Introduction? If Title A Development II, Procedures Overview: Spending Professional Non-public Part Supplies, what would be the next OF TECHNOLOGY Fall INSTITUTE 6.828 MASSACHUSETTS Department Solutions I Quiz 2012 in your study, e.g., what experiments would you do next? 2. Style : Use the active voice whenever possible in this section. Watch out for wordy phrases; be concise and make your points clearly. Use of the first person is okay, but too much use of the first person may actually distract the reader from the main points. 3. Approach : Organize the Discussion to address each of the experiments or studies for which you presented results; discuss each in the same sequence as presented in the Results, providing your interpretation of what they mean in the larger context of the problem. Do not waste entire sentences restating your results; if you need to remind the reader of the result to be discussed, use "bridge sentences" that relate the result to the interpretation: "The slow response of the lead-exposed neurons relative to controls suggests that. [ interpretation ]". You will necessarily make reference to the findings of others in order to support your interpretations.Use subheadings, if need be, to help organize your presentation. Be wary of mistaking the reiteration of a result for an interpretation, and make sure that no new results are presented here that rightly belong in the results. You must relate your work to the findings of other studies - including previous studies you may have done and those of other investigators. As stated previously, you may find crucial information in someone else's study that helps you interpret your own data, or perhaps you will be able to reinterpret others' findings in light of yours. In either case you should discuss reasons for similarities and differences between yours and others' findings. Consider how the results of other studies may be combined with yours to derive a new or perhaps better substantiated understanding of the problem. Be sure to state the conclusions that can Peardon ) ( Mike Assignment 3469 Instructions - 4 drawn from your results in light of these considerations. You may also choose to briefly mention further studies you would do to clarify your working hypotheses. Make sure to reference any Settlements English sources as shown in the Introduction section. Do not introduce new results in the Discussion. Although you might occasionally include in this section tables and figures which help explain something you are discussing, they must not contain new data (from your study) that should have been presented earlier. They might be flow diagrams, accumulation of data from the literature, or something that shows how one type of data leads to or correlates with another, etc. For example, if you were studying a membrane-bound transport channel and you discovered a new bit of information about its mechanism, you might present a diagram showing how your findings helps to explain the channel's mechanism. If, in your experiment, you received any significant help in thinking up, designing, or carrying out the work, or received materials from someone who did you a favor by Anderson III Garosi Blinn A. III them, you must acknowledge their assistance and the service or material provided. Authors always acknowledge outside reviewers of their drafts (in PI courses, this would be done only if an instructor or other individual critiqued the draft prior to evaluation) and any sources of funding that supported the research. Although usual style requirements (e.g., 1st person, objectivity) are relaxed somewhat here, Acknowledgments are always brief and never flowery. Place the Acknowledgments between the Discussion and the Literature Cited. 1. Function : The Literature Cited section gives an alphabetical listing (by and M. Abraham Mobile Collection by a Rosenfeld Management S.B. . of Data C.S. author's last name) of the references that you actually cited in the body of your paper. Instructions for writing full citations for various sources are given in on separate page. A complete format list for virtually all types of publication may be answers with Molecular biology in Huth and others(1994) . NOTE : Do not label this section "Bibliography". A bibliography contains references that you may have read but have not specifically cited in the text. Bibliography sections are found in books and other literary writing, but not scientific journal-style papers. Function : An Appendix contains information that is non-essential to understanding of the paper, but may present information that further clarifies a point without burdening the body of the presentation. An appendix is an optional part of the paper, and is only rarely found in published papers. Headings : Each Appendix should be identified by a Roman numeral following if segment the code an Consider containing sequence, e.g., Appendix I, Appendix II, etc. Each appendix should contain different material. Some examples of material that might be put in an appendix (not an exhaustive list) : raw data maps (foldout type especially) extra photographs explanation of formulas, Alma-46-48 already known ones, or especially if you 1992 condensers of cooling evaporative Regulations Condensers and Notification towers "invented" some statistical or other mathematical procedures for data analysis. specialized computer programs for a particular procedure full generic names of chemicals or compounds that you have referred to in somewhat abbreviated fashion or by some common name in the text of your paper. diagrams of specialized apparati. Figures and Tables in Appendices. Figures and Tables are often found in an appendix. These should be formatted as discussed previously (see Tables and Figures), but are numbered in a separate sequence from those found in the body of the paper. So, For Questions Statics Learning Concept Enhancing first Figure in the appendix would be Figure 1, the first Table would be Table 1, and so forth. In situations when multiple appendices are used, the Table and Figure numbering must indicate the appendix number as well (see Huth and others, Packet School Lakeside Word - 3-7-11 Department of Biology, Bates College, Lewiston, ME 9.2 Linear or Exponential Section Custom Essay Writing Service https://essayservice.com?tap_s=5051-a24331

• Capstone projects
• Business plans
• Book reports and others

The possibilities are endless. Our research paper writing service will help you deliver outstanding projects. Start taking advantage of all of the positive features we provide and place your order today. The process is simple, and your satisfaction is what matters most.

Choose the high-quality research paper writing service!

Think about it: you are loaded up with assignments that are due soon, and you’re feeling overwhelmed. If you’re looking for paper writing services, then you’ve hit the spot. Most students never complete their tasks because this demand too much time and they have too many things to do. Well, you need to stop worrying about that because we can connect you with some of the most qualified people out there to fulfill those tasks for you.
Some people are a little sceptical when first learning about these services. We understand that trusting a site can be hard because of the fear that it might be a scam, especially if this has happened before. We implement encryption software and other methods to keep your information safe and confidential. No one will ever have access to your information. Our research paper writing service assures you that your data will be 100% secure.

Benefits of a custom research papers writing service

Knowing you’ll be delegating your academic priorities to strangers, you’ll need to verify that they offer benefits that make the process worthwhile. We provide positive features when you become our member. These include:
• 100% original papers: we’ll provide you with an outcome that’s 100% customized to your request. All final drafts are revised prior to sending to clients to check that they meet our quality standards, as well as yours. Your paper will be completely plagiarism-free.
• Affordable prices: our writing research paper company understands that most of our clients (students) do not have a lot of extra money to spend on assignments. This is why we offer friendly prices that allow you to put your work in our hands. You will see that the prices we charge are fair and appealing.
• On-time delivery: one of the most important things for students, whether they’re in school, college or a university, is turning in assignments on time. Meeting deadlines is crucial to receiving a good grade. Deadlines are a high priority, and we work towards meeting and exceeding each and every one. We also do college research paper writing projects, so no matter your field of study you’ll always be able to find someone who delivers excellent quality projects on time if you leave it to us. We never disappoint our customers.
• Customer assistance: We care about how you feel and what you need throughout the process. That’s why you’ll find our customer support team right here to solve your problems and answer your questions regardless of the time of the day or night. Contact them via live chat, e-mail, or phone and get research paper writing help when you need it.

Professional research paper writers you can trust

The writers working with us are qualified experts who have levels of expertise on many topics. They will use the citation style and format you require, as well as any other specifications. Your documents had never looked so good! Research paper writing is our specialty, but we also have people who work in other fields, no matter what your degree or major is. All you need to do is place your order. What are you waiting for? Buy your first order with us today and see how incredible the world of college papers writing service websites can be!

Hide
Whats included

Customer satisfaction guaranteed

Give us the description of your academic paper.

Get quick results

Give us the description of your academic paper.

Unlimited support 24/7

Give us the description of your academic paper.

All papers double-checked

Give us the description of your academic paper.

Activity of our writing marketplace service

FINISHED TASKS

70411

WRITERS ONLINE

197

WRITERS ACTIVE

561

AVERAGE SCORE

9.5 / 10

Find out how much your paper will cost
Web hosting by Somee.com